0:00
of our duo former vertical machine up
0:06
Here we have the heating drawer to heat
0:09
up several materials.
0:11
Can slide it out. Then you can use it
0:13
for plastics, solid surface material,
0:16
UPM grad and resistor. You would heat up
0:20
the material in the drawer. Heat it up.
0:22
When it's heated up, you put it on top
0:24
to the pressing unit. And the pressing
0:27
unit has already the formers inside. You
0:30
put only the vacuum on and then it
0:32
presses it down. When the material is
0:35
ready, you would open up the manual
0:38
pressing lever again, lift up the
0:40
membrane frame like this.
0:44
And then you would remove the press
0:46
samples from there. You have a pressing
0:49
height of 850 mm. And we have also
0:53
bigger machines where you can lift up to
0:55
a meter and we have also different table
0:57
sizes up to 4 m 4 m 50 it depending what
1:01
purpose you are doing. This machine is
1:04
mainly for normal veneer pressing all
1:07
types of veneering laminated bending
1:11
flat pressing also with veneer or for
1:14
composite manufacturing.
1:16
With the heating drawer, you can do all
1:19
solid surface materials like coran, high
1:22
car, beta and all the others common uh
1:26
solid surface materials. Then you can
1:28
pressing all the plastics from ABS to
1:30
Pmama, polycarbonate, PVC, PSHI,
1:34
whatever you want to press. And you also
1:37
can press the newer material common
1:39
known as UPM Prada which is a plywood
1:42
which you heat up and then form on the
1:44
top. You can work with resistor which
1:48
you also heat up in the drawer and then
1:50
you form it out or you can work with
1:52
vacuum felt which you heat up also in
1:55
the drawer and then press it on the top.
1:57
So far we are distributing in Romania
2:00
and all over the world. So our machines
2:03
are working successfully and we are have
2:06
a dealer in Romania. It's 24 wood. So
2:09
you have any inquiries so come to them.
