0:00
The brand new Fence Spray Advance built
0:03
for smaller batches, individual batches
0:06
with individual paint systems, some 2K
0:10
based and cannot be recovered. Also with
0:13
modern waterborn paints, with waterborn
0:16
UV paints to be recovered and reused
0:23
Here we have here a combination of a
0:25
machine with a possible paper belt
0:28
conveyor. You can choose a 2K system
0:31
which cannot be recovered. So you can
0:33
run with a paper belt. Beside that, if
0:36
you are running waterborn materials,
0:38
waterborn UI, you can stop working with
0:41
paper belt and start working with the
0:43
plastic belt which lead to this new
0:46
paint recovery unit. About 80% of the
0:49
distributed paint is in the offset area
0:53
around the piece on the main transport
0:55
belt and a waterborn material can be
0:58
reused again. So we are taking back
1:01
about 90% of this paint back with this
1:04
recovery unit here. The remaining 10% on
1:08
the belt will be cleaned with a cleaning
1:10
unit for cleaning the carpet and
1:12
providing for the next pieces to go into
1:15
it. The whole cleaning unit can be
1:17
disconnected to be taken to an separate
1:20
room. Very efficient and proper cleaning
1:22
can be done. It can also be exchanged to
1:24
a second one. One is prepared for
1:27
waterborn materials and one is prepared
1:30
with a solvent. You are allowed to run
1:33
solvent or waterborn materials in a fast
1:36
changing row. So you are very flexible
1:39
with that. Once investment provides you
1:41
a lot of different possibilities to
1:43
produce gun carrier to provide high
1:46
quality coating of the pieces. This is
1:48
driven by a workpiece recognition system
1:52
with a very small pitch of the detecting
1:55
sensors providing a very precise picture
1:57
of the pieces running into the machine.
1:59
The advantage of this precise detecting
2:01
is that the individual drive of each gun
2:05
is optimizing the paint use and reduce
2:08
it to a minimum. This machine is built
2:10
with a ventilated housing. We have two
2:13
ventilation zones inside able to be
2:17
adjusted according to the paint system
2:19
that is used and the amount of overspray
2:21
inside. This is reducing the dust inside
2:25
the machine. cleaning times, paper
2:27
filters for exhaust on the left and
2:30
right hand side. So an optimum
2:32
adjustment of the air situation inside
2:36
the cabin. The whole machine is
2:38
controlled by a touchscreen system where
2:41
you can store different recipes,
2:43
adjustments for the different kind of
2:46
product you are producing. We sell in
2:48
Romania through 24 wood. Please contact
2:51
Katarina Zyla and her team to get more
2:55
information about that.
